Arkray Glucocard X-Meter Informations techniques télécharger pdf (Page 4)

GLUCOCARD X-mini plus INT-IVD mmol Operating Manual (83-04345) page 2 REAR

5.1 Flagging Test Results

Flags help you categorize and identify results.

1. Leave the test strip in the meter after the test result appears on the screen.

2. Select the flag you want.

3. View the test result you want.

To go to the next result:

To go back to the previous

result:

To scroll through results:

4. To turn off the meter:

5.2 Reviewing Past Results

You can review past results stored in the memory. Your meter stores up to 500

test results. New results beyond the 500th overwrite previously stored results in

the order of oldest first.

1. Make sure the meter is off.

2. Turn on the meter.

The most recent test result

appears on the screen.

The 3-digit number following “M:” is the order in which test results are stored,

with the most recent result first. The screen also shows the date and time

when the test was done.

3. Slide the test strip disposal lever to eject the test strip. The meter turns itself

off.

Chapter 5 Managing Your Test Results

Clock counter

Control test flag

Control test results. Not part of your result averages.

Before-meal flag

For results obtained before eating

After-meal flag

For results obtained after eating

After-exercise flag

For results obtained after exercise

If the clock counter setting is on, the elapsed

time appears on the right of the after-meal

flag. See chapter 6.2.

Delete flag

For inaccurate results. Not part of your result averages. The

delete flag can be attached only after testing.

Meal amount flag

When the meal amount setting is on, the meal

amount flag appears below the after-meal flag.

Select the amount of food you ate from the 3

levels shown on the left.

5.3 Viewing Result Averages

You can view result averages for the set interval (7, 14, 30 or 90 days).

1. See steps 1 and 2 in chapter 5.2.

2. View the averages of your

glucose test results.

3. To view the averages with a

flag:

4. To turn off the meter:

5.4 Deleting All Test Results from the Memory

You can delete all test results from the memory. Remember that results cannot

be retrieved once deleted.

1. See steps 1 and 2 in chapter 5.2.

2. Go to the “AVG (average)”

screen.

3. Go to the “ALL CLEAR”

screen.

4. Select “YES”.

5. Delete the test results from

the memory.

The meter then turns itself off.

Hold for

2 seconds

Hold for

5 seconds

Hold for

2 seconds

The number of tests

included in the calculation

of the result average.

mmol/L

Twice

Hold

mmol/L

50%

80%

Full

6.1 Using the Alarm

The alarm reminds you when to test your blood glucose. You can set the alarm

to sound at 4 different times in a day.

Setting the Alarm

See chapter 7 “Meter Setup.”

When the Alarm Reaches the Set Time

A series of short beeps sound for 1 minute.

To stop the alarm:

6.2 Using the Clock Counter

You can store after-meal results together with the time elapsed since the

beginning of your last meal (up to 180 minutes).

Before Your Meal: Starting the Clock Counter

1. Make sure the meter is off.

2. Go to the “DATE:” screen.

3. From the “DATE:” screen, go

to the “Meal Time” screen.

4. Turn on the clock counter.

5. When you are about to start your meal, go to step 6 with “0 min” flashing.

If you forgot to start the clock

counter, select the time

elapsed since the beginning

of your last meal in

15-minute blocks.

6. Start the clock counter.

After the current date and

time appear, the meter turns

itself off.

To view the elapsed time

while the meter is off:

Chapter 6 Useful Functions for Your Test

Stopping the Clock Counter

1. Repeat steps 1 to 3 in “Before Your Meal: Starting the Clock Counter”.

2. Select “no”.

3. Confirm your selection.

6.3 Managing the Expiration Date of Test Strips

You can set the expiration date of test strips. The expiration warning then

appears if you insert a test strip into the meter after the set date.

Setting the Expiration Date of Your Test Strips

Select the earlier date of the following:

• Six months from opening the test strip bottle

• Date next to “Exp.” on the test strip bottle

To set the expiration date, see chapter 7 “Meter Setup”.

Checking the Set Expiration Date

1. Make sure the meter is off.

2. View the expiration date.

The expiration date appears

after the current date and

time.

Expiration Date Reminder

Do not use the inserted test strip and other test

strips in the same bottle, if the blood symbol and

expiration symbol alternately flash on the screen.

Testing after Your Meal: Changing the Elapsed Time

1. After eating, test your blood glucose.

When the clock counter setting is on, the elapsed time

and after-meal flag appear on the right of the test result.

2. To change (or set) the

elapsed time:

Select the time.

Confirm your setting.

3. Slide the test strip disposal lever to eject the test strip.

The meter turns itself off and the test result is stored together with the

elapsed time.

Hold for

2 seconds

Hold for

2 seconds

1 2 3 4

Commentaires sur ces manuels

Pas de commentaire

Arkray Glucocard X-Meter Informations techniques Page 4

Commentaires sur ces manuels